Consumers will usually only mention the color or the nature of their furniture finishing on the message rather than the types of finishing what they want to use.
Does the color of a desired finishing wood fibers will close or just wander, what distinguishes the types of finishing materials and application methods. Two types of dye based on the nature of closure in finishing workpiece surface is stain color or color pigmented.
Pigmented Coloran
These small particles are close to the color of the total media finishing applications. at a certain thickness of finishing materials will cover the surface of the workpiece so that the wood fiber is not visible, and change color according to the color pigment used. Duco paint, paint terms that may often you hear is one example of the finishing materials with a pigmented color.
Pigment is closed the total surface underneath. some examples of materials and types are finishing with paint pigment duco, metallic paint, wall paint. Although at the same finihsing materials (eg melamik) there is a type of color pigment dye or stain. Color pigments are commonly used in melamik is dark colors like black, dark gray or dark brown.
Dyes are absorbed along with finishing materials so that the effect is the transparency color. Wood fiber can still be seen clearly if we use the method of staining with the stain color. The thicker the layer of color applied to the workpiece will only make the color become darker finish but do not close 'grain'.
Pigmented color must be mixed together with better finishing materials that the next layer or base layer, while the color stain can be applied in two distinct stages. When you first before the first layer, which is when the wood is still 'raw' or mixed with finishing materials. Color stain can be applied to the wood surface by brush, cloth, or spray directly. In this way the color will soak into the wood fibers and is more easily generated color setting.
On the way coloration with stain with a mixed coating materials, preferably (recommended) mixture performed in the bottom layer a little, then added to the middle layer. Not recommended to mix the dye layer on the very end.
Furthermore, the choice of materials according to the nature 'covering'nya the workpiece is your choice. Pigmented lacquer good if aesthetic value is less good workpieces or in other words, colors, wood fiber and wood there are too many defects. Because type material, pigmented lacquer is more expensive than lacquer stain.
And if the wood fiber and has a nice color, then the stain lacquer will be better as although it will give you a little color 'imagined', wood fibers will remain visible
Does the color of a desired finishing wood fibers will close or just wander, what distinguishes the types of finishing materials and application methods. Two types of dye based on the nature of closure in finishing workpiece surface is stain color or color pigmented.
Pigmented Coloran
These small particles are close to the color of the total media finishing applications. at a certain thickness of finishing materials will cover the surface of the workpiece so that the wood fiber is not visible, and change color according to the color pigment used. Duco paint, paint terms that may often you hear is one example of the finishing materials with a pigmented color.
Pigment is closed the total surface underneath. some examples of materials and types are finishing with paint pigment duco, metallic paint, wall paint. Although at the same finihsing materials (eg melamik) there is a type of color pigment dye or stain. Color pigments are commonly used in melamik is dark colors like black, dark gray or dark brown.
Dyes are absorbed along with finishing materials so that the effect is the transparency color. Wood fiber can still be seen clearly if we use the method of staining with the stain color. The thicker the layer of color applied to the workpiece will only make the color become darker finish but do not close 'grain'.
Pigmented color must be mixed together with better finishing materials that the next layer or base layer, while the color stain can be applied in two distinct stages. When you first before the first layer, which is when the wood is still 'raw' or mixed with finishing materials. Color stain can be applied to the wood surface by brush, cloth, or spray directly. In this way the color will soak into the wood fibers and is more easily generated color setting.
On the way coloration with stain with a mixed coating materials, preferably (recommended) mixture performed in the bottom layer a little, then added to the middle layer. Not recommended to mix the dye layer on the very end.
Furthermore, the choice of materials according to the nature 'covering'nya the workpiece is your choice. Pigmented lacquer good if aesthetic value is less good workpieces or in other words, colors, wood fiber and wood there are too many defects. Because type material, pigmented lacquer is more expensive than lacquer stain.
And if the wood fiber and has a nice color, then the stain lacquer will be better as although it will give you a little color 'imagined', wood fibers will remain visible
Categories:
Finishing
1 komentar:
hemmm,....
panjang tambah lebar...
jadi bingung,..
hehehehe,...
Posting Komentar