Nitro Cellulose (NC)

Material Nitrocelluse (NC) is a liquid finishing material consisting of one component. Nitricelluse (NC), easy to apply because it is easy to spread and dry quickly.

As thiner NC pengencernya usually use because when using thiner another type of chemical reaction will occur that will affect the end result of finishing.

Various kinds nitrocelluse (NC)

NC Sanding, NC Laccour

NC Sanding is used in the process penyendingan in the finishing process. Its application mode is as follows:

1. Sand wood surface with No. 180 sandpaper, then wipe the process to be maximally penyendingan
2. NC sanding apply by brushing or spraying
3. if pemukaan large wood pores try wood filler wood was given to the pores can be closed, sshingga NC sanding the application process does not require a long time
4. repeat step 2 to produce no better results

Finishing with the NC system is suitable for interior or in the room. NC has the advantage of no yellowing, low fomaldehide, easy application, cost-effective

But finishing with NC is less resistant to household chemicals, less water resistance so he must be a dry room.

Categories: Finishing